Skip to main content

Test Intelligence step

Test Intelligence accelerates your test cycles without compromising quality, by running only the unit tests that are relevant to the code changes that triggered the build. Rather than running all test, all the time Instead of always running all unit tests, Harness automatically skips unneeded tests, speeding up your builds. You can also configure Harness TI to automatically split tests and run them in parallel.

You can use this Test Intelligence step, also known as the Test step, to run unit tests with Python, Ruby, and Java programming languages.

note

Currently, the Test step is behind the feature flag CIE_ENABLE_RUNTEST_V2. If the Test step is not available in your account, contact Harness Support to enable the feature.

Configure the Test step​

Add the Test step to the Build stage in a CI pipeline.

              - step:
                  type: Test
                  name: Intelligent Tests
                  identifier: test
                  spec:
                    command: mvn test  # Required. All other settings are optional.
                    shell: sh # Optional shell type.
                    connectorRef: account.harnessImage # Container registry connector.
                    image: repo/image # Container image to use to run the commands.
                    privileged: false
                    intelligenceMode: true # Enable Test Intelligence.
                    globs: # Test glob pattern.
                      - "some/glob/pattern"
                    reports: # Test report path.
                      - "**/*.xml"
                    envVariables:
                      MAVEN_OPTS: "-Djansi.force=true"

Metadata​

  • Name: Enter a name summarizing the step's purpose. Harness automatically assigns an ID based on the Name.
  • Description: Optional text string describing the step's purpose.

Container Registry and Image​

The build environment must have the necessary binaries for the Test step to execute your test commands. Depending on the stage's build infrastructure, Test steps can use binaries that exist in the build environment, or use Container Registry and Image to pull an image, such as a public or private Docker image, that contains the required binaries.

When are Container Registry and Image required?

The stage's build infrastructure determines whether these fields are required or optional:

  • Kubernetes cluster build infrastructure: Container Registry and Image are always required.
  • Local runner build infrastructure: Test steps can use binaries available on the host machine. The Container Registry and Image are required if the machine doesn't have the binaries you need.
  • Self-managed AWS/GCP/Azure VM build infrastructure: Test steps can use binaries that you've made available on your build VMs. The Container Registry and Image are required if the VM doesn't have the necessary binaries. These fields are located under Additional Configuration for stages that use self-managed VM build infrastructure.
  • Harness Cloud build infrastructure: Test steps can use binaries available on Harness Cloud machines, as described in the image specifications. The Container Registry and Image are required if the machine doesn't have the binaries you need. These fields are located under Additional Configuration for stages that use Harness Cloud build infrastructure.
What are the expected values for Container Registry and Image?

For Container Registry, provide a Harness container registry connector, such as a Docker connector, that connects to the container registry where the Image is located.

For Image, provide the FQN (fully-qualified name) or artifact name and tag of a Docker image that has the binaries necessary to run the commands in this step, such as maven:3.8-jdk-11. If you don't include a tag, Harness uses the latest tag.

You can use any Docker image from any Docker registry, including Docker images from private registries. Different container registries require different name formats:

  • Docker Registry: Enter the name of the artifact you want to deploy, such as library/tomcat. Wildcards aren't supported. FQN is required for images in private container registries.
  • ECR: Enter the FQN of the artifact you want to deploy. Images in repos must reference a path, for example: 40000005317.dkr.ecr.us-east-1.amazonaws.com/todolist:0.2.
  • GCR: Enter the FQN of the artifact you want to deploy. Images in repos must reference a path starting with the project ID that the artifact is in, for example: us.gcr.io/playground-243019/quickstart-image:latest.

Command and Shell​

Use these fields to define the commands that you need to run in this step.

For Shell, select the shell type. If the step includes commands that aren't supported for the selected shell type, the step fails. Required binaries must be available on the build infrastructure or through a specified Container Registry and Image. The default shell type, if unspecified, is Sh.

In the Command field, enter commands for this step. The script is invoked as if it were the entry point. If the step runs in a container, the commands are executed inside the container.

info

Harness uses a built-in environment variable named JAVA_TOOL_OPTIONS.

You can append additional settings to this value, but do not override the default value.

info

Incremental builds don't work for Bazel if you give the entire repo in the Command. All modules are built for Bazel.

Intelligence Mode​

Enable Intelligence Mode to enable Test Intelligence.

Test Globs​

You can override the default test globs pattern, if applicable to your build tool.

For example:, the default for RSpec is **/spec/**/*_spec.rb, and you could override it with any other pattern, such as spec/features/**/*_spec.rb, which would look for a /spec directory at the root level, rather than anywhere in the workspace.

As another example, the default for a Python test tool could be *_test.py or test_*.py, you could override it with any other pattern, such as .test.py. Because test selection is at the file-level, the test globs pattern references file names. You can include directory structures, such as microservice1/**/test_*.py.

Report Paths​

This setting is optional. If unspecified, Harness uses the default JUnit report path **/*.xml.

You can use this setting if your test reports are stored in a non-default location or have a non-default name pattern.

For example:

              - step:
                  type: Test
                  name: Intelligent Tests
                  identifier: test
                  spec:
                    ...
                    reports:
                      - tmp/junit.xml

You can add multiple paths. If you specify multiple paths, make sure the files contain unique tests to avoid duplicates. Glob is supported. Test results must be in JUnit XML format.

Output Variables​

Output variables expose values for use by other steps or stages in the pipeline.

YAML example: Output variable

In the following YAML example, step alpha exports an output variable called myVar, and then step beta references that output variable.

              - step:
                  type: Run
                  name: alpha
                  identifier: alpha
                  spec:
                    shell: Sh
                    command: export myVar=varValue
                    outputVariables:
                      - name: myVar
              - step:
                  type: Run
                  name: beta
                  identifier: beta
                  spec:
                    shell: Sh
                    command: |-
                      echo <+steps.alpha.output.outputVariables.myVar>
                      echo <+execution.steps.alpha.output.outputVariables.myVar>
warning
  • Secrets in output variables exposed in logs: If an output variable value contains a secret, be aware that the secret will be visible in the build details. Such secrets are visible on the Output tab of the step where the output variable originates and in the build logs for any later steps that reference that variable. For information about best practices for using secrets in pipelines, go to the Secrets documentation.
  • 64KB length limit: If an output variable's length is greater than 64KB, steps can fail or truncate the output. If you need to export large amounts of data, consider uploading artifacts or exporting artifacts by email.
  • Single line limit: Output variables don't support multi-line output. Content after the first line is truncated. If you need to export multi-line data, consider uploading artifacts or exporting artifacts by email.

Create an output variable​

To create an output variable, do the following in the step where the output variable originates:

  1. In the Command field, export the output variable. For example, the following command exports a variable called myVar with a value of varValue:

    export myVar=varValue

  2. In the step's Output Variables, declare the variable name, such as myVar.

Reference an output variable​

To reference an output variable in a later step or stage in the same pipeline, use a variable expression that includes the originating step's ID and the variable's name.

Use either of the following expressions to reference an output variable in another step in the same stage:

<+steps.[stepID].output.outputVariables.[varName]>
<+execution.steps.[stepID].output.outputVariables.[varName]>

To reference an output variable in a stage other than the one where the output variable originated, use either of the following expressions:

<+stages.[stageID].spec.execution.steps.[stepID].output.outputVariables.[varName]>
<+pipeline.stages.[stageID].spec.execution.steps.[stepID].output.outputVariables.[varName]>

To reference an output variable, the variable expression must include the originating step's ID and the variable's name.
Early access feature: Secret type selection
note

Currently, this early access feature is behind the feature flags CI_ENABLE_OUTPUT_SECRETS and CI_SKIP_NON_EXPRESSION_EVALUATION. Contact Harness Support to enable the feature.

You can enable type selection for output variables in Run steps.

If you select the Secret type, Harness treats the output variable value as a secret and applies secrets masking where applicable.

Early access feature: Output variables as environment variables
note

Currently, this early access feature is behind the feature flag CI_OUTPUT_VARIABLES_AS_ENV. Contact Harness Support to enable the feature.

With this feature flag enabled, output variables from steps are automatically available as environment variables for other steps in the same Build (CI) stage. This means that, if you have a Build stage with three steps, an output variable produced from step one is automatically available as an environment variable for steps two and three.

In other steps in the same stage, you can refer to the output variable by its key without additional identification. For example, an output variable called MY_VAR can be referenced later as simply $MY_VAR. Without this feature flag enabled, you must use an expression to reference the output variable, such as <+steps.stepID.output.outputVariables.MY_VAR>.

With or without this feature flag, you must use an expression when referencing output variables across stages, for example:

name: <+stages.[stageID].spec.execution.steps.[stepID].output.outputVariables.[varName]>
name: <+pipeline.stages.[stageID].spec.execution.steps.[stepID].output.outputVariables.[varName]>
YAML examples: Referencing output variables

In the following YAML example, a step called alpha exports an output variable called myVar, and then a step called beta references that output variable. Both steps are in the same stage.

              - step:
                  type: Run
                  name: alpha
                  identifier: alpha
                  spec:
                    shell: Sh
                    command: export myVar=varValue
                    outputVariables:
                      - name: myVar
              - step:
                  type: Run
                  name: beta
                  identifier: beta
                  spec:
                    shell: Sh
                    command: |-
                      echo $myVar

The following YAML example has two stages. In the first stage, a step called alpha exports an output variable called myVar, and then, in the second stage, a step called beta references that output variable.

    - stage:
        name: stage1
        identifier: stage1
        type: CI
        spec:
          ...
          execution:
            steps:
              - step:
                  type: Run
                  name: alpha
                  identifier: alpha
                  spec:
                    shell: Sh
                    command: export myVar=varValue
                    outputVariables:
                      - name: myVar
    - stage:
        name: stage2
        identifier: stage2
        type: CI
        spec:
          ...
          execution:
            steps:
              - step:
                  type: Run
                  name: beta
                  identifier: beta
                  spec:
                    shell: Sh
                    command: |-
                      echo <+stages.stage1.spec.execution.steps.alpha.output.outputVariables.myVar>

If multiple variables have the same name, variables are chosen according to the following hierarchy:

  1. Environment variables defined in the current step
  2. Output variables from previous steps
  3. Stage variables
  4. Pipeline variables

This means that Harness looks for the referenced variable within the current step, then it looks at previous steps in the same stage, and then checks the stage variables, and, finally, it checks the pipeline variables. It stops when it finds a match.

If multiple output variables from previous steps have the same name, the last-produced variable takes priority. For example, assume a stage has three steps, and steps one and two both produce output variables called NAME. If step three calls NAME, the value of NAME from step two is pulled into step three because that is last-produced instance of the NAME variable.

Unpredictability with parallelism

For stages that use looping strategies, particularly parallelism, the last-produced instance of a variable can differ between runs. Depending on how quickly the parallel steps execute during each run, the last step to finish might not always be the same.

To avoid conflicts with same-name variables, either make sure your variables have unique names or use an expression to specify a particular instance of a variable, for example:

name: <+steps.stepID.output.outputVariables.MY_VAR>
name: <+execution.steps.stepGroupID.steps.stepID.output.outputVariables.MY_VAR>
YAML examples: Variables with the same name

In the following YAML example, step alpha and zeta both export output variables called myVar. When the last step, beta, references myVar, it gets the value assigned in zeta because that was the most recent instance of myVar.

              - step:
                  type: Run
                  name: alpha
                  identifier: alpha
                  spec:
                    shell: Sh
                    command: export myVar=varValue1
                    outputVariables:
                      - name: myVar
              - step:
                  type: Run
                  name: zeta
                  identifier: zeta
                  spec:
                    shell: Sh
                    command: export myVar=varValue2
                    outputVariables:
                      - name: myVar
              - step:
                  type: Run
                  name: beta
                  identifier: beta
                  spec:
                    shell: Sh
                    command: |-
                      echo $myVar

The following YAML example is the same as the previous example except that step beta uses an expression to call the value of myVar from step alpha.

              - step:
                  type: Run
                  name: alpha
                  identifier: alpha
                  spec:
                    shell: Sh
                    command: export myVar=varValue1
                    outputVariables:
                      - name: myVar
              - step:
                  type: Run
                  name: zeta
                  identifier: zeta
                  spec:
                    shell: Sh
                    command: export myVar=varValue2
                    outputVariables:
                      - name: myVar
              - step:
                  type: Run
                  name: beta
                  identifier: beta
                  spec:
                    shell: Sh
                    command: |-
                      echo <+steps.alpha.output.outputVariables.myVar>

Environment Variables​

You can inject environment variables into the step container and use them in the step's commands. You must input a Name and Value for each variable.

You can reference environment variables in the Command by name, such as $var_name.

Variable values can be fixed values, runtime inputs, or expressions. For example, if the value type is expression, you can input a value that references the value of some other setting in the stage or pipeline.

Using an expression for an environment variable's value.
Stage variables

Stage variables are inherently available to steps as environment variables.

Parallelism (Test Splitting)​

To enable parallelism (test splitting) in a Test step, specify the number of parallel workloads to divide the tests into.

For example:

              - step:
                  type: Test
                  name: Intelligent Tests
                  identifier: test
                  spec:
                    ...
                    parallelism : 4 # Divide tests into 4 parallel workloads.

Additional container settings​

Settings specific to containers are not applicable in a stages that use VM or Harness Cloud build infrastructure.

Image Pull Policy​

If you specified a Container Registry and Image, you can specify an image pull policy:

  • Always: The kubelet queries the container image registry to resolve the name to an image digest every time the kubelet launches a container. If the kubelet encounters an exact digest cached locally, it uses its cached image; otherwise, the kubelet downloads (pulls) the image with the resolved digest, and uses that image to launch the container.
  • If Not Present: The image is pulled only if it isn't already present locally.
  • Never: The image is not pulled.

Run as User​

If you specified a Container Registry and Image, you can specify the user ID to use for running processes in containerized steps.

For a Kubernetes cluster build infrastructure, the step uses this user ID to run all processes in the pod. For more information, go to Set the security context for a pod.

Privileged​

For container-based build infrastructures, you can enable this option to run the container with escalated privileges. This is equivalent to running a container with the Docker --privileged flag.

Set Container Resources​

These settings specify the maximum resources used by the container at runtime. These setting are only available for container-based build infrastructures, such as a Kubernetes cluster build infrastructure.

  • Limit Memory: The maximum memory that the container can use. You can express memory as a plain integer or as a fixed-point number using the suffixes G or M. You can also use the power-of-two equivalents Gi and Mi. The default is 500Mi.
  • Limit CPU: The maximum number of cores that the container can use. CPU limits are measured in CPU units. Fractional requests are allowed. For example, you can specify one hundred millicpu as 0.1 or 100m. The default is 400m. For more information go to Resource units in Kubernetes.

Timeout​

You can set the step's timeout limit. Once the timeout is reached, the step fails and pipeline execution proceeds according to any Step Failure Strategy settings or Step Skip Condition settings.

Trigger test selection​

If you enabled Intelligence Mode, you must run your pipeline twice to trigger test selection.

  1. If your pipeline doesn't already have one, add a webhook trigger that listens for Pull Request or Push events in your codebase.

  2. Activate the trigger by opening a PR or pushing changes to your codebase, and then wait while the build runs. You can monitor the build's progress on the Build details page.

    If you created a PR, merge the PR after the build runs.

  3. To trigger test selection, activate the trigger again (by opening a PR or pushing changes to your codebase).

    The first run with TI doesn't apply test selection, because Harness must establish a baseline for comparison in future runs. After establishing a baseline, each time this pipeline runs, Harness can select relevant tests to run based on the content of the code changes.

  4. Wait while the build runs, and then review the test results and test selection. If you created a PR, merge the PR after the build runs.

Trigger test selection with a manual build​

  1. Open a PR or push changes to your pipeline's codebase, and then run your pipeline.

    If you opened a PR, select Git Pull Request for Build Type, and enter the PR number.

    If you pushed changes, select Git Branch for Build Type, and then enter the branch name.

  2. Wait while the build runs. You can monitor the build's progress on the Build details page.

    If you created a PR, merge the PR after the build runs.

  3. To trigger test selection, open a new PR (or push changes) to your codebase, and then run your pipeline again.

    The first run with TI doesn't apply test selection, because Harness must establish a baseline for comparison in future runs. After establishing a baseline, each time this pipeline runs, Harness can select relevant tests to run based on the content of the code changes.

  4. Wait while the build runs, and then review the test results and test selection. If you created a PR, merge the PR after the build runs.

Why do I have to run the pipeline twice?​

The first time you run a pipeline after adding the Run Test step, Harness creates a baseline for test selection in future builds. Test selection isn't applied to this run because Harness has no baseline against which to compare changes and select tests. You'll start seeing test selection and time savings on the second run after you have added the Test step.

Ignore tests or files​

If you want Test Intelligence to ignore certain tests or files, create a .ticonfig.yaml file in your codebase, and list the tests and files to ignore. For example:

config:
  ignore:
    - "README.md"
    - ".ticonfig.yaml"
    - "**/*.go"
    - "**/Dockerfile*"
    - "licenses/**/*"
    - "img/**/*"

Troubleshoot Test Intelligence​

Go to the CI Knowledge Base for questions and issues related to Test Intelligence, including: